To drive on a track it is advisable to take off the original mirrors..

But how can You fix the original fairing to the frame hiding the not so attractive holes that will remain?

These small tags are the right solution.

We have given them the aspect of real precious gems!

You can choose among 5 different gleaming colours, all with their silk screen, giving them a refined touch to Your motorbike while on the track, or in any occasion in which you want to show it off (sporting events, fairs etc..)

Motul fluid cooler Motocool Factory Line

Motul Moto Cool Factory Line is a liquid cooler for closed cooling circuits. Ready to use antifreeze specifically for motorcycles. A major product of Motul research and development. Motocool Factory Line offers optimal protection for most modern motorcycle engines in aluminum / magnesium lightweight construction. Also recommended for use in racing, if coolants are allowed. Reduces operating temperatures and enables optimum power delivery even under extreme conditions. Prevents scale deposits, especially in narrow cooling circuits.

Nitrite free / Amine free / Phosphate free / Free borate / silicate free

Benefits:

- Ready to use cooling liquid, no dilution with water is required
- Prevents limescale, especially in confined cooling circuits
- Highly effective additive package protects against corrosion and cavitation in the cooling circuit
- Extremely high boiling point (+ 136 ° C / + 277 ° F *)
- Reduces engine operating temperature and allows optimum power delivery even under extreme conditions
- Excellent compatibility with seal and hose materials
- Can be used in professional racing, provided the regulations permits
- Guarantees optimum frost and corrosion protection of the entire cooling system
- Only with other coolants on the same basis (organic) miscible
- In hard water areas, only a prefabricated product as Motocool factory line should be used

Features:

Red Color
Frost protection: -35 ° C
Boiling point: 136 ° C

Fit for all Models ( without Panigale and KÖWE ) 

Lithium-ion batteries by JMT, tech for your motorcycle.
By replacing a standard lead-acid battery with a lithium-ion battery JMT up to 5 kg are saved without significant

Following advantages speak for JMT lithium-ion batteries:

- About 1/3 of the weight of lead-acid battery similar
- Unbeatable ratio of cost / weight reduction
- Operates in any position, as they contain no acid
- Contains no heavy metals
- Balanced discharge / charge of all cells by Balancer
- Fast charging with high charge (up to 90% in 6 min)
- Very low self-discharge (up to 5% per month)
IMPORTANT: micro consumers, such as Navihalter etc. ALWAYS put on ignition plus!
- Even at high temperatures still good performance 60-80 ° C.
- Safe technology and long life

Lead-acid batteries can be due to the specific properties use only 30% of its capacity, while lithium-ion batteries, nearly 100% of the capacity can be used.
For this reason, the lithium batteries JMT versions for the same starting power require only 1/3 of the capacity of a comparable lead-acid battery.
A uniform charge of all cells is also ensured by a built-in processor ("balancer").
The dimensions of the lithium-ion batteries by using adapters correspond to the dimensions of the original lead-acid batteries.
The connections are the same, so the battery can be replaced without further adjustments in a few minutes.

JMT lithium-ion batteries can be controlled with conventional chargers (eg JMP JMP 800 or 4000 or Optimate Lithium ) are charged.
The normal charging current is generally equal to about the capacity (eg 2.8 Ah = 2.8 A charge current).
In a quick-charge, even a charging current can be used, which corresponds to a maximum of 10 times the capacity (for example, 2.8 Ah = 28A charging current).
We recommend the use of JMP30000Pro charger and compliance with the technical. Data values ​​mentioned.

Although the lightweight battery is real living, it should be noted that the starting capacity is given at temperatures below zero degrees Celsius limited.

12V/4,8Ah
Comparable with the dimensions and connections with:
 Yuasa YT12B-BS YT14B-BS YB16AL-A2

 -12 V maintenance-free lithium-ion battery

-Energy 58.0 WH

-Dimensions in mm 150 x 65 x 130

-Charging current recommended 2.5 amps

-maximum charge current for fast charging 24 amps

-Weight under 1.0 kg

-Low-temperature test current 290

12V/4,8Ah  Fit for :

Scrambler

Ducati S 620-800ie

Multistrada 620-1100

Multistrada 1200

Monster S2R - S4R(S)

Monster 696-1100( EVO )

Monster 400-1000

Hypermotard 796-1100( EVO )

Desmosedici RR

Diavel

Ducati 851-888

Ducati 748-998

Ducati 749-999

Ducati SS und SL  all Modell and Years

Ducati Streetfighter

ST2- ST4 ( ABS ) und ST3 ( ABS )

All Sport and Classic Modelle 750-1000 / GT 1000

To drive on a track it is advisable to take off the original mirrors.. But how can You fix the original fairing to the frame hiding the not so attractive holes that will remain? These small tags from Evotech s.r.l. are the right solution. We have given them the aspect of real precious gems! You can choose among 6 different gleaming colours, all with their silk screen, giving them a refined touch to Your motorbike while on the track, or in any occasion in which you want to show it off (sporting events, fairs etc..)

Brake lever lock For a safe state of the vehicle: - During transport - On the lift - When parking on slopes

STOMPGRIP Traction Pads for streetbikes make gripping your ride incredibly easy, and therefore require less energy to hold on to the bike.

They are custom designed and engineered to fit tank sides, tank covers, tank tops, tank rear sections, frames, & more. Features: Increased bike control.

More contact between the bike and rider. Reduced fatigue and arm pump. More lower body grip and less upper body stress. Ultra-clear proprietary elastomer material. Developed to meet STOMP’s exacting specs. (pat. pend.) Also available in black. Aggressive volcano profile traction bumps. Paint and graphics remain visible through the traction pads.

Non-abrasive material.

Designed to wear down and be replaced like a tire.

Does not wear leathers as compared to griptape. Pre-molded with rounded edges that resist peeling.

Super strong 3M peel-and-stick adhesive.

MADE IN THE USA

Check out our Tank Protectors and Adhesion Promoter Kit in the “Street-Universal” section.

call or write an email for price

call or write an email for price

call or write an email for price